When using the included components, the adapter can recharge a Dewalt 20V Max 2.0Ah battery in about 40 minutes, and a 5Ah battery in about 90 minutes. With the included adapter, Dewalt 20V Max batteries can be charged at a rate of 3.25A. The 65W adapter is larger than smartphone and tablet chargers, but still what I would consider easily portable. We will continue to evaluate smaller 100W offerings for future configurations of this kit to increase the charge rate for battery charging. We chose to kit with a 65W AC power supply due to the user feedback we received in regard to their acceptance of size, portability, and overall value of the kit in terms of MSRP. We asked Dewalt about this, and here’s what they said: I assumed that the included 65W charging adapter signified a balance between cost and capabilities, but there’s more to it. A 100W AC charger (or higher) should work well. ![]() To take advantage of the adapter’s fastest Dewalt battery charging rate, you’ll need a higher wattage AC power brick than the included 65W adapter. The battery port input and output are rated at 6A at 20V. The USB-A port is rated at 12W max – that’s 2.4A at 5V – and the USB-C PD port is rated at 3A at 5-15V and 5A at 20V. The charging adapter has two ports – a USB-A port, and a USB-C PD input and output port. You can use lower power AC charging adapters as well – I tested the adapter with a 20W USB-C smartphone charger, and it seemed to work just fine, albeit slowly. (This creates the most compact portable battery bank configuration possible.) I have the Dewalt power adapter connected to and charging a Dewalt PowerStack battery. And, with the included – or industry standard – accessories, you can use the adapter as a Dewalt 20V Max power tool battery charger. You can use the DCB094 as a USB power adapter, turning any Dewalt 20V Max or FlexVolt battery into a portable power bank. 100W charging cable (USB-C on both ends)ĭual Functionality – Dewalt Charger & USB Charging.This product is not associated with and is not endorsed by Dewalt®. Note to customers: Dewalt® is a registered trademark of the Dewalt Inductrial Tool Co., used under license.Maximum Output Amp: 2A (USB port), 3A (Barrel jack)įeatures: Short-circuit, under-voltage, over-current protection Output Voltage: 5V DC (USB port), 12V DC (Barrel jack) SYL-2615 Set powered by PA-DD1 adapter and Dewalt ® battery (SYL-2615 Set and Dewalt ® battery are not included)Ĭompatible battery Input voltage: 17 ~ 20V DC ![]() Similarly, 2.0Ah (DCB203) 20V MAX battery should be rated as 3,300mAh 12V power bank, or 8,000mAh 5V power bank. When consider the power capacity as 5V power bank, this DCB205 battery is equivalent to a 20,000mAH 5V power bank. Technical talk: When considering the power capacity as a 12V power bank, the 5.0Ah (DCB205) 20V MAX battery should be rated as 8,300mAh. 12V output maximum amperage is increased to 3A. For bullet style smokers such as Weber Smokey Mountain, a 10CFM blower needs to run at less than 30% average time (ambient temp: 40F, set temp 225F). For Kamado style smokers/grills such as Big Green Egg, a 6.5CFM blower only needs to run at less than 5% average time (ambient temp: 40F, set temp: 225F). 50 Hours operating time is based on 2Ah battery, SYL-1615 controller and 6.5CFM blower (5% average blower output). The actual operating time depends on many factors, including the battery capacity, ambient temperature, cooking temperature, blower size and also the fuel burning status. *: 20 Hours operating time is based on 2Ah battery, SYL-2615 controller and 20CFM blower (30% average blower output). They can be used for charging cell phones and/or other USB powered device such as Bluetooth speakers. One of the 5V USB output is rated for 1 amp and the other is rated for 2.1 amp. Typically a fully charged DeWalt ® battery can handle 20 ~ 50 hours average cooking*. It can be used to power the heated jacket, video camera, BBQ smoker controller, and many other devices that requires a 12VDC power supply. ![]() The output connection is a standard 5.5/2.1 mm barrel power jack. One male to male power cord for our Auber smoker controller is included. It will convert the DeWalt ® 20V lithium battery into a 12V regular lithium battery power bank (power pack) with one 12V 3A DC** output and two USB 5V DC outputs. If you have DeWalt ® power drill or other power tools that use DeWalt ® 20V Max battery, this unit will allow you to power our charcoal smoker controllers with the same battery. One 3 ft power cable is also included for your convenience, which can be used to power SYL-1615 / SYL-2615 / SYL-3615 BBQ controller directly. This listing includes one 12V & 5V converter / charger for DeWalt ® 20V Battery, DCB091 compatible, for Heated Jacket, Video Camera, BBQ Smoker Controller. New product update: 5A 12V adapter is released! Please see PA-DD2.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |